12. června 2009

Dvoupásmová anténa na 6/4m úprava modelu

Konstrukce této antény zaujala Uffeho PA5DD, který na svých stránkách má srovnání dvoupásmových antén pro pásma 4/6m. Uffe zoptimalizoval mode v 4NEC2. Který si lépe poradí s open sleeve nepájením. Optimalizované rozměry jsou zde:
Parametry po optimalizaci:

50.2MHz: 6.4 dBi / 20.8 dB F/B good SWR
70.2MHz: 6.9 dBi / 14.7 dB F/B good SWR

Tuto anténu provozuji cca měsíc, mám na ni uděláno několik desítek QSO na 6m. A na 4m ODX CT1HZE přes 2000km.

3 komentáře:

Rick G6AKG řekl(a)...

Good day can you please explain the figures on your NEC4 diagram of this antenna I wish to build one. 73 Rick G6AKG

Teo PA4Y řekl(a)...

Hey Richard,

On the left are the distances of the element from the radiator, on the right the lengtes. In black are the as built sizes, in red the sizes accoring to the NEC optimisation. The NEC version however has not been tested. Hope this helped you a bit. Bood Lücken with building the antenna.

73 Teo PA4Y

Unknown řekl(a)...

Thank you very much for this beautiful design.
I want to build this antenna as well.
I have one more question.
Are the elements electrically connected to the tree?
Or are they insulated?

73 Frank PA2DKW